Descripción de la publicación
2024 XCMG QY25K5D
- New Crane
- One Year Warranty
- Immediate Delivery
SUPERSTRUCTURE
-Frame: Designed and manufactured by XCMG, made of high strength steel.
-Hydraulic System: Quadruple pump is driving by engine. Constant delivery pump is used for lifting, elevating, telescoping and slewing; Load sensitive proportional multi-way change valve, impact-resistant valve and anti-cavitation corrosion valve are equipped. Air-cooled hydraulic oil radiator;
Volume of hydraulic oil tank:474L
All movements using two control levers. Crane movements are controlled by hydraulic pump and proportional valve.
-Main winch system: Hydraulic controlled speed regulation, main groove drum is equipped, driven by hydraulic motor through planetary gearreducer, and built-in normally closed brake and counterbalance valve are available.
-Slewing system: Four-point ball contact slewing ring. Slewing system is driven by hydraulic motor, with planetary gear reducer, for 360° continuous rotation, stepless slewing Speed regulation is available. Horn button is equipped on the control lever.
-Elevating system: Single-supported double acting front- mounted hydraulic elevating cylinder, with balance valve equipped.
-Operator’s cab: Ergonomic cab design, with swing-out doors, safety glass, sun visor, adjustable seats and protective rails equipped. Air-conditioner is standard.
-Safety devices: Hydraulic balance valve; Hydraulic relief valve; Double-way hydraulic valve; LMI; spring aligning device for joystick; Lowering limiter for preventing wire rope from over-releasing; Anti-two block at boom head for preventing wire rope from over-winding; tri-color warning lamp.
Anemometer, winch monitor device; level gauge.
-Boom system: 5-section, U-shape cross section, welding structure.
Boom length:10.5m 41m
Single top: single pulley, fitted on boom head, used for single line operation. Its lifting performance is the same as that for boom, but could not exceed 2.8t.
Jib: 1-section. Lattice jib, welded sturcture. Three offset angles of 0°, 15° and 30°. Fixed jib length:8.3m.
CHASSIS
-Frame: designed and manufactured by XCMG, with all covered walking surface, anti- torsion box structure and optimal load- bearing structure design, made of imported high strength steel.
-Outrigger: 4 outriggers, H-shaped arrangement, lateral and vertical outrigger controlled by the hydraulic control. Control levers are located on both sides of the chassis, with a luminous level gauge equipped, with the fifth jack, and the vertical outrigger has two-way hydraulic lock. Outrigger float dimension: ÿ400mm Max. outrigger reaction force: 323KN
-Engine: MC07H.32-50, in-line six-cylinder water- cooled EFI diesel engine, manufactured by CNHTC, rated power 235kW /2200rpm, max. torque 1250Nm / 1200-1600rpm, the national V emission standards.
SC9DF300.1Q5, in-line six-cylinder water- cooled EFI diesel engine, manufactured by Shanghai Diesel Engine Co., Ltd., rated power 221kW /2200rpm, max. torque 1250Nm / 1400rpm, the na tiona l V emission standards.
Fuel tank capacity: 240L
-Gearbox: FAST manually mechanical control, 9- speed available, synchronizer is equipped.
-Axles: High strength axle with reliable performance from Meritor. 2nd axle and 3rd axle for driving.
-Tires: 10 tires and 1 spare tire, front axle is equipped with single tire, middle axle and rear axle are equipped with double tire. Tire specifications: 11.00R20 or 11.00-20
-Brakes: double-circuit air pressure brake, acting on all wheels. Parking brake: spring energy brake, acting on wheels of 2-3 axles.Auxiliary brake: engine exhaust brake and engine in-cylinder brake.
-Steering: Mechanically steering mechanism with hydraulic power assisted.
-Driver’s cab: Full-dimension driver's cab, three passengers are allowable. Equipped with radio, adjustable seats, simple sleeper , steering wheel, safety glasses, electrically controlled windshield washer, electrically operated rearview mirror , electrically operated door window and glove box.
Heater and air conditioner are available.
-Electrical system: 24V DC, two sets of batterie. Generator: 28V-70A. GPS Vehicle mounted positioning communication terminal.
XCMG QY25K5D
Descripción de la publicación
2024 XCMG QY25K5D
- New Crane
- One Year Warranty
- Immediate Delivery
SUPERSTRUCTURE
-Frame: Designed and manufactured by XCMG, made of high strength steel.
-Hydraulic System: Quadruple pump is driving by engine. Constant delivery pump is used for lifting, elevating, telescoping and slewing; Load sensitive proportional multi-way change valve, impact-resistant valve and anti-cavitation corrosion valve are equipped. Air-cooled hydraulic oil radiator;
Volume of hydraulic oil tank:474L
All movements using two control levers. Crane movements are controlled by hydraulic pump and proportional valve.
-Main winch system: Hydraulic controlled speed regulation, main groove drum is equipped, driven by hydraulic motor through planetary gearreducer, and built-in normally closed brake and counterbalance valve are available.
-Slewing system: Four-point ball contact slewing ring. Slewing system is driven by hydraulic motor, with planetary gear reducer, for 360° continuous rotation, stepless slewing Speed regulation is available. Horn button is equipped on the control lever.
-Elevating system: Single-supported double acting front- mounted hydraulic elevating cylinder, with balance valve equipped.
-Operator’s cab: Ergonomic cab design, with swing-out doors, safety glass, sun visor, adjustable seats and protective rails equipped. Air-conditioner is standard.
-Safety devices: Hydraulic balance valve; Hydraulic relief valve; Double-way hydraulic valve; LMI; spring aligning device for joystick; Lowering limiter for preventing wire rope from over-releasing; Anti-two block at boom head for preventing wire rope from over-winding; tri-color warning lamp.
Anemometer, winch monitor device; level gauge.
-Boom system: 5-section, U-shape cross section, welding structure.
Boom length:10.5m 41m
Single top: single pulley, fitted on boom head, used for single line operation. Its lifting performance is the same as that for boom, but could not exceed 2.8t.
Jib: 1-section. Lattice jib, welded sturcture. Three offset angles of 0°, 15° and 30°. Fixed jib length:8.3m.
CHASSIS
-Frame: designed and manufactured by XCMG, with all covered walking surface, anti- torsion box structure and optimal load- bearing structure design, made of imported high strength steel.
-Outrigger: 4 outriggers, H-shaped arrangement, lateral and vertical outrigger controlled by the hydraulic control. Control levers are located on both sides of the chassis, with a luminous level gauge equipped, with the fifth jack, and the vertical outrigger has two-way hydraulic lock. Outrigger float dimension: ÿ400mm Max. outrigger reaction force: 323KN
-Engine: MC07H.32-50, in-line six-cylinder water- cooled EFI diesel engine, manufactured by CNHTC, rated power 235kW /2200rpm, max. torque 1250Nm / 1200-1600rpm, the national V emission standards.
SC9DF300.1Q5, in-line six-cylinder water- cooled EFI diesel engine, manufactured by Shanghai Diesel Engine Co., Ltd., rated power 221kW /2200rpm, max. torque 1250Nm / 1400rpm, the na tiona l V emission standards.
Fuel tank capacity: 240L
-Gearbox: FAST manually mechanical control, 9- speed available, synchronizer is equipped.
-Axles: High strength axle with reliable performance from Meritor. 2nd axle and 3rd axle for driving.
-Tires: 10 tires and 1 spare tire, front axle is equipped with single tire, middle axle and rear axle are equipped with double tire. Tire specifications: 11.00R20 or 11.00-20
-Brakes: double-circuit air pressure brake, acting on all wheels. Parking brake: spring energy brake, acting on wheels of 2-3 axles.Auxiliary brake: engine exhaust brake and engine in-cylinder brake.
-Steering: Mechanically steering mechanism with hydraulic power assisted.
-Driver’s cab: Full-dimension driver's cab, three passengers are allowable. Equipped with radio, adjustable seats, simple sleeper , steering wheel, safety glasses, electrically controlled windshield washer, electrically operated rearview mirror , electrically operated door window and glove box.
Heater and air conditioner are available.
-Electrical system: 24V DC, two sets of batterie. Generator: 28V-70A. GPS Vehicle mounted positioning communication terminal.
Ubicación
![Marker](/_next/static/media/marker.3cff38e0.png)