Descripción de la publicación
2024 XCMG QY30K5C
- New Crane
- One Year Warranty
- Immediate Delivery
SUPERSTRUCTURE
-Frame: Designed and manufactured by XCMG, made of high strength steel.
-Hydraulic System: Quadruple pump is driving by engine. Constant delivery pump is used for lifting, elevating, telescoping and slewing; Load sensitive proportional multi-way change valve, impact-resistant valve and anti-cavitation corrosion valve are equipped. Air-cooled hydraulic oil radiator;
Volume of hydraulic oil tank: 600L
-Operating mode: Hydraulic pilot control of all crane. All movements using two control levers. Crane movements are controlled by hydraulic pump and proportional valve.
-Main winch system: Hydraulic controlled speed regulation, groove drum is equipped, driven by hydraulic motor through planetary gearreducer, and built-in normally closed brake and counterbalance valve are available.
-Auxiliary winch system: Hydraulic controlled speed regulation, Groove drum is equipped, driven by hydraulic motor through planetary gear reducer, and built-in normally closed brake and counterbalance valve are available.
-Slewing system: Four-point ball contact slewing ring. Slewing system is driven by hydraulic motor, with planetary gear reducer, for 360° continuous rotation, stepless slewing Speed regulation is available. Horn button is equipped on the control lever.
-Elevating system: Single-supported double acting front- mounted hydraulic elevating cylinder, with balance valve equipped.
-Operator’s cab:New fully-enclosed steel tiltable cab with a full-view front window. Safety glass and sun shields are used for windows. Wipers are fitted for the windshield and roof window. The cab features a new ergonomic seat design with backrest adjustment and armrests with joysticks fitted. A sliding door and a pull-out step are available. Heater and air conditioner are available.
-Safety devices: Hydraulic balance valve; Hydraulic relief valve; Double-way hydraulic valve; LMI; spring aligning device for joystick; Lowering limiter for preventing wire rope from over-releasing; Anti-two block at boom head for preventing wire rope from over-winding; tri-color warning lamp.
Anemometer, winch monitor device; level gaunge.
-Boom system: 5-section, U-shape cross section, welding structure.
Boom length: 10.8 m 43m
Single top: is installed on the top of main boom, for single wire rope hoist. Its lifting performance is the same as that for jib (9m), with 0° jib offset angles.
Jib: 1-section Lattice jib, welded structure. Three offset angles of 0°, 15° and 30°.
Fixed jib: 9m
CHASSIS
-Frame: is designed and manufactured by XCMG, with all covered walking surface, anti- torsion box structure and optimal load- bearing structure design, made of imported high strength steel.
-Outrigger: 4 outriggers, H-shaped arrangement, lateral and vertical outrigger controlled by the hydraulic control. Control levers are located on both sides of the chassis, with a luminous level gauge equipped, with the fifth jack, and the vertical outrigger has two-way hydraulic lock. Outrigger float dimension: ÿ400mm Max. outrigger reaction force: 323KN
-Engine: SC9DF300.1Q5, in-line six-cylinder water- cooled EFI diesel engine, manufactured by Shanghai Diesel Engine Co., Ltd., rated power 221kW /2200rpm, max. torque1250Nm / 1400rpm, the national V emission standards..
Fuel tank capacity: 320L
-Gearbox: FAST manually mechanical control, 9- speed available, synchronizer is equipped.
-Axles: High strength axle with reliable performance from Meritor. 2nd axle and 3rd axle for driving.
-Tires: 10 tires and 2 spare tire, front axle is equipped with single tire, middle axle and rear axle are equipped with double tire. Tire specifications:315/80R22.5.
-Brakes: double-circuit air pressure brake, acting on all wheels. Parking brake: spring energy brake, acting on wheels of 2-3 axles.Auxiliary brake: engine exhaust brake and engine in-cylinder brake.
-Steering: Mechanically steering mechanism with hydraulic power assisted.
-Driver’s cab: Full-dimension driver's cab, three passengers are allowable. Equipped with radio, adjustable seats, simple sleeper , steering wheel, safety glasses, electrically controlled windshield washer, electrically operated rearview mirror , electrically operated door window and glove box.
Heater and air conditioner are available.
-Electrical system: 24V DC, two sets of batterie. Generator: 28V-70A.
XCMG QY30K5C
Descripción de la publicación
2024 XCMG QY30K5C
- New Crane
- One Year Warranty
- Immediate Delivery
SUPERSTRUCTURE
-Frame: Designed and manufactured by XCMG, made of high strength steel.
-Hydraulic System: Quadruple pump is driving by engine. Constant delivery pump is used for lifting, elevating, telescoping and slewing; Load sensitive proportional multi-way change valve, impact-resistant valve and anti-cavitation corrosion valve are equipped. Air-cooled hydraulic oil radiator;
Volume of hydraulic oil tank: 600L
-Operating mode: Hydraulic pilot control of all crane. All movements using two control levers. Crane movements are controlled by hydraulic pump and proportional valve.
-Main winch system: Hydraulic controlled speed regulation, groove drum is equipped, driven by hydraulic motor through planetary gearreducer, and built-in normally closed brake and counterbalance valve are available.
-Auxiliary winch system: Hydraulic controlled speed regulation, Groove drum is equipped, driven by hydraulic motor through planetary gear reducer, and built-in normally closed brake and counterbalance valve are available.
-Slewing system: Four-point ball contact slewing ring. Slewing system is driven by hydraulic motor, with planetary gear reducer, for 360° continuous rotation, stepless slewing Speed regulation is available. Horn button is equipped on the control lever.
-Elevating system: Single-supported double acting front- mounted hydraulic elevating cylinder, with balance valve equipped.
-Operator’s cab:New fully-enclosed steel tiltable cab with a full-view front window. Safety glass and sun shields are used for windows. Wipers are fitted for the windshield and roof window. The cab features a new ergonomic seat design with backrest adjustment and armrests with joysticks fitted. A sliding door and a pull-out step are available. Heater and air conditioner are available.
-Safety devices: Hydraulic balance valve; Hydraulic relief valve; Double-way hydraulic valve; LMI; spring aligning device for joystick; Lowering limiter for preventing wire rope from over-releasing; Anti-two block at boom head for preventing wire rope from over-winding; tri-color warning lamp.
Anemometer, winch monitor device; level gaunge.
-Boom system: 5-section, U-shape cross section, welding structure.
Boom length: 10.8 m 43m
Single top: is installed on the top of main boom, for single wire rope hoist. Its lifting performance is the same as that for jib (9m), with 0° jib offset angles.
Jib: 1-section Lattice jib, welded structure. Three offset angles of 0°, 15° and 30°.
Fixed jib: 9m
CHASSIS
-Frame: is designed and manufactured by XCMG, with all covered walking surface, anti- torsion box structure and optimal load- bearing structure design, made of imported high strength steel.
-Outrigger: 4 outriggers, H-shaped arrangement, lateral and vertical outrigger controlled by the hydraulic control. Control levers are located on both sides of the chassis, with a luminous level gauge equipped, with the fifth jack, and the vertical outrigger has two-way hydraulic lock. Outrigger float dimension: ÿ400mm Max. outrigger reaction force: 323KN
-Engine: SC9DF300.1Q5, in-line six-cylinder water- cooled EFI diesel engine, manufactured by Shanghai Diesel Engine Co., Ltd., rated power 221kW /2200rpm, max. torque1250Nm / 1400rpm, the national V emission standards..
Fuel tank capacity: 320L
-Gearbox: FAST manually mechanical control, 9- speed available, synchronizer is equipped.
-Axles: High strength axle with reliable performance from Meritor. 2nd axle and 3rd axle for driving.
-Tires: 10 tires and 2 spare tire, front axle is equipped with single tire, middle axle and rear axle are equipped with double tire. Tire specifications:315/80R22.5.
-Brakes: double-circuit air pressure brake, acting on all wheels. Parking brake: spring energy brake, acting on wheels of 2-3 axles.Auxiliary brake: engine exhaust brake and engine in-cylinder brake.
-Steering: Mechanically steering mechanism with hydraulic power assisted.
-Driver’s cab: Full-dimension driver's cab, three passengers are allowable. Equipped with radio, adjustable seats, simple sleeper , steering wheel, safety glasses, electrically controlled windshield washer, electrically operated rearview mirror , electrically operated door window and glove box.
Heater and air conditioner are available.
-Electrical system: 24V DC, two sets of batterie. Generator: 28V-70A.