Sarens Helps Build Africa’s Tallest Bridge In Cairo READ YOUR FREE COPY HERE: https://moveitmagazine.com/2023/09/08/sarens-helps-build-africas-tallest-bridge-in-cairo/ Sarens has played a pivotal role in the construction of what is set to become one of Africa’s highest bridges, the Al Hadarat Bridge in Cairo. Over the course of several weeks, Sarens executed two lifting operations on behalf of Arab Contractors, bringing the bridge project one step closer to completion. In the initial phase, Sarens successfully lifted and installed eleven massive steel beams, each weighing 150 tonnes and stretching 41 meters in length. To accomplish this, the crew utilized a CC4800 crane configured for SSL (Super Slim Lift) with a 66-meter main boom and 270T SL CW. After carefully hoisting each beam from its original position, the crane was expertly maneuvered into its designated location. The dedicated four-person team flawlessly executed eleven such lifts over the course of a single week. The choice of equipment for these lifts was crucial, and it performed admirably throughout the operation. The CC4800 crane was transported to the site following its completion of a prior project. Rigging preparations consumed five days, with the team working within extremely confined spaces, at times having only a mere 10cm of clearance. For the subsequent series of lifts, Sarens deployed the CC2600H crane, equipped with a 78-meter main boom, for another challenging high-altitude operation. The same four-person crew then installed 63 beams, each weighing a substantial 90 tonnes and measuring an impressive 50 meters in length. After carefully lifting each beam from the trailer, the team adeptly positioned it into place, successfully completing 63 such lifts within a span of three weeks. Once again, the choice of crane was paramount due to its capacity, and precise positioning was a critical aspect of the planning phase, given the necessity for a series of tightly coordinated lifts. The crane was brought to the site following its completion of a prior project, and rigging preparations took three days. The crane’s positioning was particularly challenging, with only a scant 15cm of clearance in its immediate surroundings. Working in close collaboration with the client, project manager Mohamed Abd El Nasser and country manager Essam Adel ensured meticulous attention to detail, from determining the number of lifts required to pinpointing exact lifting locations during installation. Despite contending with some challenging winds, the team successfully carried out the lifts necessary for this iconic project. The world’s gaze is fixed upon the Al Hadarat Bridge project, and Sarens takes immense pride in its role in bringing this remarkable endeavor to fruition! #CC4800 #CC2600H

WILKERSON CRANE RENTAL EXPANDS FLEET Read or download your free copy here: https://www.cranestodaymagazine.com/news/wilkerson-crane-rental-expands-fleet-11084928 Third Manitowoc MLC300 lattice boom crawler with VPC-MAX boosts crane company’s capacity for the large tasks. Kansas City, USA-based company, Wilkerson Crane Rental (Wilkerson), commemorates its 10th anniversary by enhancing its capabilities through the acquisition of a new Manitowoc MLC300 lattice-boom crawler crane equipped with VPC-MAX technology. Despite its long-standing expertise in hoisting, lift planning, heavy hauling, and equipment servicing spanning over four decades, Wilkerson Crane Rental officially commenced operations in 2013. The establishment of the company emerged as Diana Holt orchestrated a rescue effort for the crane division, previously on the verge of dissolution. The division had been a significant part of her husband Jeff Holt's career as an operator and assembly director, and her father-in-law Fred Holt who was the general manager. Under Diana's leadership as CEO and with Jeff overseeing operations as the Director of Operations, Wilkerson Crane Rental has expanded. The company's fleet of cranes now extends to regions including Arkansas, Iowa, Illinois, Missouri, Nebraska, New Mexico, Texas, and Wyoming. The impetus for this growth, says Manitowoc, has been a surge in local economic activity, including the construction of a new airport, data centres, and a battery plant, alongside the escalating demand for wind farms and infrastructure projects. Jeff Holt, director of operations at Wilkerson, shared insights into their crane acquisitions: "Four years ago, we procured our inaugural MLC300 featuring an extended wide boom and upper boom point, primarily designated for wind farm projects. With the exception of a brief interlude for a three-month assignment, this crane has been pivotal in the maintenance of numerous wind turbines over time. "Two years later we introduced a second MLC300 with similar specifications which initially embarked on wind-related ventures but soon diversified its role to encompass tilt-wall construction and infrastructure undertakings—where its versatility shone. Presently, it is stationed on a long-term project involving the replacement of a bridge over Table Rock Lake in Ridgedale, Missouri. "Five months back, we invested in our third MLC300, this time integrating the VPC-MAX and Wide Boom Plus attachments. These additions are interchangeable across all three MLC300 units and have been instrumental in maintaining wind towers reaching heights of up to 100 meters. In the past five months, these attachments facilitated complete rotor drops for 100-meter wind turbines. The latest crane assignment involves contributing to the construction of a sizable tire plant in Topeka, Kansas, utilising its main boom and fixed jib." The recent inclusion of a 386 ton capacity crawler, sourced from Kirby Smith, bolstered Wilkerson's collection, which already featured two other MLC300 models. The fleet extends to encompass a range of Manitowoc crawlers, including the MLC90-A, 999, 16000, and MLC650 equipped with VPC-MAX. Notably, the MLC650 with VPC-MAX has successfully completed operations on two bridge projects and is now exclusively dedicated to wind farm initiatives. Expanding beyond cranes, Wilkerson's equipment inventory also embraces offerings from Manitowoc and Grove, incorporating the Grove GMK6350, RT765E-2, as well as four National Crane boom trucks—with plans for an additional two to join soon. # MLC300

Did you know that Exact Crane has a dedicated team member to take care of your Outrigger Mats, Pads, & Ground Protection needs? Questions on what will fit your crane? Exact Crane can help you get the Exactly what you need! Contact Nick at Exact Crane today: ☎️ Call: 888-635-5636 📧 Email: cranepads@exactcrane.com >>> More sizes available not listed <<< # Demag

THE ERECTORS BUY LIEBHERR LTM 1300-6.3 Read or download your free copy here: https://www.cranestodaymagazine.com/news/the-erectors-buy-liebherr-ltm-1300-63-11035550/ Canadian crane company The Erectors buy 300 tonne capacity, 90 metre long telescopic boom mobile crane. Crane rental company The Erectors Hoisting and Rigging Inc. has added a new six-axle Liebherr LTM 1300-6.3 to its fleet. The crane has the longest boom in its class that can be carried at a 12 tonne axle load. The Erectors will use it for erecting and dismantling tower cranes and as a taxi crane in crane rental. “The LTM 1300-6.3 complements our fleet perfectly,” said Justin Tabani from The Erectors. “The 300-tonne crane is a crane of the future and makes our fleet even more innovative. We chose this Liebherr mobile crane because it is simply the best in its class.” With lattice extensions, it allows a maximum hook height of 120 metres and a maximum boom radius of 94 metres. Integrated features include: ECOmode, ECOdrive, VarioBase Plus, VarioBallast, Auto-Ballast, single-engine concept, and wind speed load charts. “We chose a Liebherr machine because of the company’s commitment to their customers and the industry, and the fact that they continue to make their already excellent products even better,” said Jeffrey Burke from The Erectors. “We can also depend on reliable service backed up by more than 70 years of industry experience,” added Marco Ottorino from The Erectors. Marco Ottorino, Jeffrey Burke and Justin Tabani founded The Erectors Hoisting and Rigging Inc. which operates across Southern Ontario. #LTM1300-6.3

🏗️🚧 𝐁𝐨𝐭𝐡 𝐥𝐨𝐨𝐤 𝐠𝐫𝐞𝐚𝐭, 𝐰𝐡𝐢𝐜𝐡 𝐨𝐧𝐞 𝐰𝐢𝐥𝐥 𝐲𝐨𝐮 𝐭𝐚𝐤𝐞?! 🚧🏗️ 𝟐𝟎𝟏𝟗 𝐓𝐚𝐝𝐚𝐧𝐨 𝐆𝐑𝟑𝟓𝟎𝐗𝐋-𝟑 & 𝟐𝟎𝟏𝟑 𝐆𝐫𝐨𝐯𝐞 𝐑𝐓𝟓𝟒𝟎𝐄 ✓ Ready to roll, for sale or bare rent ✓ Located in Solon, Ohio & available immediately 𝐂𝐨𝐧𝐭𝐚𝐜𝐭 𝐭𝐡𝐞 𝐄𝐱𝐚𝐜𝐭 𝐂𝐫𝐚𝐧𝐞 𝐒𝐚𝐥𝐞𝐬 𝐓𝐞𝐚𝐦 📞 440-349-1999 📧 sales@exactcrane.com •••𝙄𝙛 𝙮𝙤𝙪 𝙖𝙧𝙚 𝙞𝙣𝙩𝙚𝙧𝙚𝙨𝙩𝙚𝙙 𝙞𝙣 𝙖 𝙘𝙧𝙖𝙣𝙚, 𝙀𝙭𝙖𝙘𝙩 𝘾𝙧𝙖𝙣𝙚 𝙤𝙛𝙛𝙚𝙧𝙨 𝙩𝙝𝙚 𝙤𝙥𝙥𝙤𝙧𝙩𝙪𝙣𝙞𝙩𝙮 𝙩𝙤 𝙫𝙞𝙨𝙞𝙩 & 𝙨𝙚𝙚 𝙩𝙝𝙚 𝙪𝙣𝙞𝙩 𝙞𝙣 𝙥𝙚𝙧𝙨𝙤𝙣 𝙤𝙧 𝙬𝙚 𝙘𝙖𝙣 𝙥𝙧𝙤𝙫𝙞𝙙𝙚 𝙖 𝙫𝙞𝙙𝙚𝙤 𝙤𝙛 𝙩𝙝𝙚 𝙢𝙖𝙞𝙣 𝙛𝙚𝙖𝙩𝙪𝙧𝙚𝙨••• ​ ​

Raimondi Middle East Deploys Eight Flat-Top Cranes For Aljada Megaproject In Sharjah READ YOUR FREE COPY HERE: https://moveitmagazine.com/2023/07/10/raimondi-middle-east-deploys-eight-flat-top-cranes-for-aljada-megaproject-in-sharjah/ Raimondi Middle East has successfully deployed eight flat-top cranes for the rapidly growing Aljada megaproject in Sharjah, United Arab Emirates, developed by Arada. These cranes were erected in April 2023 with the assistance of Raimondi Middle East’s operations team and are actively involved in the construction of the Sokoon apartment blocks. The jobsite encompasses five residential buildings, featuring a total of 482 homes along with commercial space in Aljada’s cultural neighborhood, known as the Naseej District. The addition of four Raimondi MRT111s, one MRT159, and three MRT294s brings the total count of Raimondi cranes employed on the project to 22. Expected to remain on-site for approximately 14 to 16 more months, these crane models were specifically chosen based on their technical specifications, compliance with the contractor’s requirements, and the demanding project timeline. “We selected cranes with lifting capacities ranging from 8 to 14 tons, and maximum lifting speeds of 136 m/min,” explained Wael Hasan, Commercial Director at Raimondi Middle East. Due to the high number of cranes to be installed and the congested nature of the site, careful planning and positioning were essential to avoid any overlap, Hasan added. The four MRT111s-8tn are currently operating with a jib length of 36 meters and final heights of 60 and 48 meters. These versatile cranes offer excellent performance in terms of load capacity and hoisting speed, equipped with a 30kW hoist and a drum capacity of 450 meters, lifting at a maximum speed of 100m/min. Featuring a jib length of 44 meters and a 45kW hoist power, the MRT159-8tn has been erected with a maximum lifting speed of 136m/min and a final height of 66 meters. This flat-top crane is renowned for its exceptional load diagram and ease of installation. Sharing the same maximum lifting speed as the MRT159, the three MRT294s on-site boast a hoisting gear of 73.5kW, a maximum lifting capacity of 14 tons, and final heights of 54 and 60 meters. These cranes, erected with jib lengths of 36 and 60 meters, exhibit outstanding performance and durability in various climatic conditions. The Raimondi Middle East operations team will continue to provide support for the construction of the Sokoon buildings, conducting monthly maintenance checks and performing necessary crane climbing procedures as the project progresses, concluded Hasan. #MRT111s #MRT159 #MRT294s

If you're in need of hoisting or rigging services for your next project, our crane company can help! Call us today for more information at (780) 221-5581! https://bit.ly/2XayF2l #Bc2CraneServices

Trivia time! ⏰ Going in a little bit of a different direction for this one! Who is credited with inventing the hand chain hoist? Comment below and we'll respond with the correct answer on Friday.

LGH recently partnered with Paramount Millwright Services out of Cedar Rapids, IA, to provide a couple of Hydraulic Gantries for moving a 40,000 lb Kraken Drier. Superintendent Scott Moeller said that with very little head room and very limited floor space, the gantries worked wonderfully. He also noted the excellent service provided by LGH Rental Representative Mark Daubert. Thank you, Paramount, for your business! To learn more about our hydraulic gantries, please visit https://www.rentlgh.com/product-category/hoisting/.

ZOOMLION LAUNCHES WORLD’S LARGEST TOWER CRANE Read or download your free copy here: https://www.cranestodaymagazine.com/news/zoomlion-launches-worlds-largest-tower-crane-10821612/ 720 tonne capacity R2000-720 tower crane rolls off Zoomlion’s Changde factory production line. Chinese construction machinery manufacturer Zoomlion has launched the new R2000-720 tower crane at its Tower Crane Intelligent Factory in Changde. Claimed to be the world’s largest tower crane, the R2000-720 incorporates 305 invention patents and 158 novel scientific research achievements. With a 720t capacity and a height of 400m, the crane can lift 500 automobiles up to 130 storeys. It represents a milestone for Zoomlion in its global expansion strategy for advanced manufacturing. The company’s Changde manufacturing facility can produce 13 models of large tower cranes at full capacity, covering nearly all the requirements of ongoing large hoisting projects. The R2000-720 will be used in the building of the Ma’anshan Yangtze River Highway-Railway Bridge, a three-tower cable-stayed bridge. Zoomlion spokesperson said: “R2000-720 has made innovations and breakthroughs in balancing weight, structure, intelligent control and other technologies, solving multiple global challenges for ultra-large tower cranes under extremely complex working conditions, such as strong wind, high humidity and heavy load, meaning it’s not just the world’s largest, but also strongest tower crane.” The R2000-720 employs a heavy-duty split structure and a high-load-bearing lightweight construction. This helps reduce the tower crane’s upper structure by more than 20% in comparison to traditional solutions, says Zoomlion. #R2000-720

Our ATF-220G is showing off its reach while hoisting air units in Nisku, AB.

😍new Shipment 𝐜𝐫𝐚𝐧𝐞 𝐩𝐚𝐝𝐬 ✦ 𝐠𝐫𝐨𝐮𝐧𝐝 𝐩𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧 𝐦𝐚𝐭𝐬 ✦ 𝐬𝐥𝐢𝐧𝐠 𝐩𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧... & 𝐦𝐨𝐫𝐞! Contact Nick at Exact Crane today: Call: 888-635-5636 Email: cranepads@exactcrane.com 𝐌𝐀𝐓𝐒 𝐈𝐍 𝐒𝐓𝐎𝐂𝐊 More sizes available not listed below ••• 𝐬𝐡𝐢𝐩 𝐨𝐮𝐭 𝐢𝐦𝐦𝐞𝐝𝐢𝐚𝐭𝐞𝐥𝐲 ••• 𝐒𝐪𝐮𝐚𝐫𝐞 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬: ● 18”x18”x1” ● 24”x24”x1” ● 24”x24”x1.5” ● 36”x36”x2” 𝐑𝐨𝐮𝐧𝐝 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬 ● 30” x 1.5” ● 36” x 1.5” ● 42”x2” ● 48”x2” ● 48x3” 𝐅𝐢𝐛𝐞𝐫𝐌𝐚𝐱 𝐂𝐫𝐚𝐧𝐞 𝐏𝐚𝐝𝐬 ● 36” x 1” (Round Pads) ● 42” x 1” (Round Pads) ● 48” x 1” (Round Pads) ● 5’ x 4’ x 6” (Square Pads) ● 6’ x 5’ x 6” (Square Pads) ● 8’ x 5’ x 10” (Square Pads) ● 7’ x 5’ x 6.75”-HD (Square Pads) 𝐆𝐫𝐨𝐮𝐧𝐝 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧 𝐌𝐚𝐭𝐬: ● 4’x8’ ● 3’x8’ # Demag

Fit your fleet w/a faithful forty ton on this # throwbackthursday. • 2007 Grove RT540E • 2002 Link-Belt HTC8640 Located FOB Solon, Ohio Contact the Exact Crane Sales Team: 📞440-349-1999 📧sales@exactcrane.com #cranes4sale

TNT Crane & Rigging Canada team hoisting bridge girders for the Anthony Henday Bridge expansion across the North Saskatchewan River using two LTM1160-5.1 All Terrain cranes.

𝐓𝐫𝐞𝐚𝐭 𝐲𝐨𝐮𝐫 𝐜𝐫𝐚𝐧𝐞 𝐭𝐨 𝐓𝐫𝐢𝐦𝐛𝐥𝐞! The Exact Crane parts department has a large assortment of new and used parts to fit exactly what you need. Give us a call or email today for additional information. Call 440-349-1999 or email parts@exactcrane.com

From duty cycles to mounting methods - check out our latest blog for all the basic need-to-knows about electric chain hoists! https://bit.ly/2ZyaW04

Get PEACE with the 𝐑𝐈𝐆𝐇𝐓 GREASE! 🄱🄴🄲🄷🄴🄼 “𝑬𝒒𝒖𝒊𝒑𝒎𝒆𝒏𝒕 𝑴𝒐𝒗𝒆𝒔 𝑩𝒆𝒕𝒕𝒆𝒓 𝒘𝒊𝒕𝒉 𝑩𝒆𝒄𝒉𝒆𝒎” - Leading Producers of Industrial Lubricants - Variety of products in stock - Extend the longevity of your equipment - Function in a wide range of temperatures - Water resistant - Provide protection against wear & corrosion - Long life lubrication Call Exact Crane at 440-349-1999 to purchase today!

Inspect. Test. Certify. Rent. Repeat. www.rentlgh.com/equipment Pictured: (6) 16T Air Chain Hoists, 130' Height of Lift, (4) 500 CFM Air Dryers, (3) 27.5T Sheave Blocks, (4) 20T Sheave Blocks, (1) 2T Hoist & Air Trolley w/ push button pendant control

Taking on is a 2007 Grove RT540E. Call 888-635-5636 for more information! LOCATION: Solon, Ohio @grove_mobile_cranes @manitowoc_cranes

Call the 𝕄𝔸𝕋 𝕄𝔸N today - and get those pads right away! 𝐏𝐋𝐄𝐍𝐓𝐘 𝐎𝐅 𝐌𝐀𝐓𝐒 𝐈𝐍 𝐒𝐓𝐎𝐂𝐊 More sizes available not listed below ••• 𝐬𝐡𝐢𝐩 𝐨𝐮𝐭 𝐢𝐦𝐦𝐞𝐝𝐢𝐚𝐭𝐞𝐥𝐲 ••• 𝐒𝐪𝐮𝐚𝐫𝐞 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬: ● 24” x 24” x 1” Square Pads ● 18” x 18” x 1” Square Pads ● 36” x 36” x 1.5” Square Pads ● 36” x 36” x 2” Square Pads 𝐑𝐨𝐮𝐧𝐝 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬 ● 30” x 1.5” Round Pads ● 36” x 1.5” Round Pads ● 42” x 2” Round Pads ● 48” x 2” Round Pads ● 48 x 3” Round Pads 𝐅𝐢𝐛𝐞𝐫𝐌𝐚𝐱 𝐂𝐫𝐚𝐧𝐞 𝐏𝐚𝐝𝐬 ● 5’ x 4’ x 6” ● 6’ x 5’ x 6” ● 8’ x 5’ x 10” ● 7’ x 5’ x 6.75”-HD 𝐆𝐫𝐨𝐮𝐧𝐝 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧: ● 3’ x 8’ Alturnamats ● 4’ x 8’ Alturnamats Contact Nick at Exact Crane today: Call: 888-635-5636 Email: cranpads@exactcrane.com

🚨NEW PRODUCT ALERT🚨 LGH has a new product, and it made its debut at the ITI Hoisting Excellence Summit last week. This 50T low headroom multi-lug lifting beam, manufactured by ARS, is now available for rent from LGH in 20' and 40' lengths. https://bit.ly/3QBl52H

We had a visit from Cody Price with IUOE Local 234 - Iowa Operating Engineers last week! We reduce risk for the hoisting industry.

Let Exact Crane 🄷🄾🄾🄺 you up w/ the Exact Block or Ball your crane requires! 🔸As a Ropeblock Dealer we have a variety of new and used inventory that is supported by our experienced & knowledgeable parts team. RANGE OF INVENTORY ⬤Manufacturers ⬤Tonnage ⬤Weight ⬤Sheaves Contact our Part Dept today: Call: 888-635-5636 Email: parts@exactcrane.com #Cranes4Sale

𝟓𝟓 - 𝟔𝟎 Ton Florida RT’s Available & Looking 👀 for Work! ☀1998 𝐆𝐫𝐨𝐯𝐞 𝐑𝐓𝟖𝟓𝟓𝐁 55 ton Cummins Engine 115’ Boom 33’-60’ Jib 2 hoists Block & Ball ☀𝟐𝟎𝟎𝟔 • 𝟐𝟎𝟎𝟒 𝐆𝐫𝐨𝐯𝐞 𝐑𝐓𝟕𝟔𝟎𝐄 60 ton Cummins Engine 110’ Boom 33’-56’ Jib 2 hoists AC Cabs Block & Ball Contact the Exact Crane Sales Team: 📞440-349-1999 📧sales@exactcrane.com #cranes4sale

Santa’s sleigh is on its way, so get that order in today! Don’t delay and let us know; get them in time for some ho ho ho. LAST DAY: Giveaway Drawing 𝒕𝒐𝒎𝒐𝒓𝒓𝒐𝒘: 12pm EST NEW MATS ARRIVED TODAY ••• 𝐬𝐡𝐢𝐩 𝐨𝐮𝐭 𝐢𝐦𝐦𝐞𝐝𝐢𝐚𝐭𝐞𝐥𝐲 ••• 𝐒𝐪𝐮𝐚𝐫𝐞 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬: ● 24” x 24” x 1” Square Pads ● 18” x 18” x 1” Square Pads ● 36” x 36” x 1.5” Square Pads ● 36” x 36” x 2” Square Pads 𝐑𝐨𝐮𝐧𝐝 𝐎𝐮𝐭𝐫𝐢𝐠𝐠𝐞𝐫 𝐏𝐚𝐝𝐬 ● 30” x 1.5” Round Pads ● 36” x 1.5” Round Pads ● 42” x 2” Round Pads ● 48” x 2” Round Pads ● 48 x 3” Round Pads 𝐅𝐢𝐛𝐞𝐫𝐌𝐚𝐱 𝐂𝐫𝐚𝐧𝐞 𝐏𝐚𝐝𝐬 ● 6’ x 5’ x 6” ● 8’ x 5’ x 10” ● 6’ x 5’ x 6”-HD 𝐆𝐫𝐨𝐮𝐧𝐝 𝐏𝐫𝐨𝐭𝐞𝐜𝐭𝐢𝐨𝐧: ● 4’ x 8’ Alturnamats Contact Nick at Exact Crane today: Call: 888-635-5636 Email: nick@exactcrane.com

On the Fourth Day of Christmas My Crane said to me... it needed some Crane Mats, so contact EXACT Crane for the set that you need! OUTRIGGER & CRANE PADS ➱ FiberMax Crane Pads ➱ FiberMax Outrigger Pads ➱ SafetyTech Outrigger Pads (Variety of Sizes!) ➱ Ground Protection Mats FEATURES: Waterproof Chemical Resistant Non-Conductive Comfortable Handles Durable & Strong Material ONLY Engineered Crane Pad Available in 3D Lift Planning Software

🅃🄷🅁🄴🄴 RT’s 𝘸𝘩𝘰 will get the keys? 🔑 60 ton RT's Available For Sale. •2011 •2006 & •2004 Grove RT760E LOCATION: Ohio & Florida Contact Exact Crane for more information: 📞440-349-1999 📧sales@exactcrane.com #cranes4sale

Beautiful day to be out hoisting at Hatton Crane!

The manpower services of Hadimpro are branded “want-to-hoist-for-you” - 12hoist4u. Founded in 2008, 12hoist4u is specialized in staffing the market niche for (heavy) lifting, hoisting, rigging and specialised transport with competent and experienced personnel. Our 12hoist4u professionals are well trained, certified and motivated to securely and efficiently support our clients for short or longer periods of time. 12hoist4u's ambition is to bring professionals and clients together all over the world.

Hadimpro are independent consultants providing expert services in the field of (heavy) lifting, hoisting, rigging and specialized transport fully dedicated to her client’s needs from specific markets. Originating from a region with global market leading companies in heavy lift shipping, owning world’s biggest fleets of cranes, operating the most innovative lifting, hoisting, rigging and transport solutions and the most forward-thinking engineering companies.

I leave you a little story... happy Friday. Of the provisional reception of a thirty-ton power crane supplied by tender by Messrs. Sheldon and Gerdtzen and installed in the outgoing wharf No. 2 of those built by this Board. Reconnaissance and tests of a steam crane with a power of thirty tons, supplied and assembled by Messrs. Sheldon and Gerdtzen in the aforementioned wharf No. 2. The recognition shows that the materials that go into the construction of the crane are of good quality, that the workmanship is careful and that the assembly has been carried out with the necessary perfection. To carry out the tests, the fifty-two-ton counterweight was placed, which is the one that has been adopted for the maximum load in this crane, and it was rotated without a load on the boom, with only the effort of two men, applied to the cranks of the movement by hand. This turn was made smoothly with the greatest ease, which demonstrates excellent project, construction and assembly conditions. For the successive tests, it was taken into account, as provided in article eight of the optional and economic specifications of the contest, that they had to be power and speed; and since the crane is designed to manually lift loads that do not exceed ten tons, the tests had to be carried out first with manual movement and then with the steam engine. The tests by hand were carried out by suspending a load of ten thousand kilograms of chains, with the effort of six men, who hoisted seventy centimeters in ten minutes, making a ninety-degree turn in one minute and two seconds, that is, at a speed of thirty-five centimeters per minute hoisting and a complete turn of the crane in four minutes and eight seconds. These speeds are within the ordinary conditions that six-man effort can produce on a hand-held crane. For the tests with a steam engine, a wooden barge was prepared, displacing approximately thirty-two cubic meters, after having placed the beams and steel wire ties. The day before the official test, this barge was suspended by means of the same crane, extracting it from the sea and placing it on the dock, and on the day of the date it was suspended again in the presence of the signatories, making it describe a turn of one hundred and sixty and four degrees in one minute and twenty seconds, a speed almost double that established in the specifications, which detailed later, required a speed of three hundred and sixty degrees in four minutes. The barge was lowered, leaving it on the dock again and a load of four tons of chains was added, which added to the thirty-two of the barque, give a total of thirty-six tons. That final load was suspended by the crane hoisting eighty centimeters in thirty-three seconds, which gives a speed of two meters and seven centimeters per minute, that is, twice the speed established in the specifications, which is one meter per minute. . To finish the tests, the crane was rotated until the boat projected out of the dock and was lowered into the water with the chain load attached. All these tests took place without any resistance or assembly defect being noted in the machine, verifying all the movements regularly and precisely. It is also stated in the certificate issued by Messrs. Sheldon and Gerdtzen in accordance with the provisions of article nine of the specifications for the tender, that the factories of the base of the crane and the embedments of the irons that hold it, built by the Board of Works of the Port are made in accordance with the project and with the solidity necessary to secure and handle the crane and this is confirmed by the recognition carried out by the Chief Engineer, who in view of all the above and in compliance with article ten of the specifications of conditions, provisionally considers the crane received, subject to what the Superiority resolves and for the record, signs this document, in quadruplicate, with the Messrs. above exposed in Santander on May 16, 1

12hoist4u specializes in providing the right staffing in the niche market for hoisting & lifting, heavy lift and specialized transport with skilled and experienced staff. Their professionals are excellently trained and motivated to support customers risk-free and efficiently for a shorter or longer period. Their aim is to be among the market leaders in a niche market to which they are fully committed: lifting, lifting, heavy lift and specialized transport. Welcome to the club! 💪🏻

“want-to-hoist-for-you” supplies her customers an unrivalled service by supplying (heavy) lifting, hoisting, rigging and specialised transport professionals for both long and short term contracts. When it comes to a specialist labour supplier, 12hoist4u can provide your company with the following professionals: Technical Authority Subject Matter Expert Rigging Engineer Integrated Transport and Heavy Lift Project Manager Heavy Lift Project Manager Heavy Lift Supervisor Offshore Heavy Lift Supervisor Offshore and Subsea Procedure Developer and Liftplan reviewer Crane and Transport Supervisor Appointed Person – Person in Charge – Competent Person Health and Safety Supervisor specialized in Hoisting and Lifting Auditor on Procedure Compliance Consultant for Incident Investigation Assessor Crane and Rigging Coach Trainer - Instructor Crane Coordinator Hoisting and Lifting Equipment Inspector Hoisting, Lifting and Specialized Transport Engineer Tower Crane Operator (saddle/luffing jib) Pedestrian Tower Crane Operator Mobile Tower Crane Operator Mobile Crane Operator Crawler Crane Operator Lattice Boom Heavy Lift Crane Operator Offshore Heavy Lift Crane Operator (1000 ton and above) Offshore Pedestal Crane Operator Offshore Knuckle Boom Crane Operator Offshore Subsea Crane Operator Pile Driving Crane Operator Side Boom Crane Operator Overhead Travelling Crane Operator Heavy Haulage Driver / Exceptional Transport Driver Self-Propelled Modular Transporter (SPMT) Operator Gin Pole Truck Operator Winch Truck Operator Telehandler Operator Forklift Operator Mobile Elevating Work Platform (MEWP) Operator Industrial Relocation Specialist - Technical Transport Specialist Rigger (onshore and offshore) Signaller - Banksman Slinger

The manpower services of Hadimpro are branded “want-to-hoist-for-you” - 12hoist4u. Founded in 2008, 12hoist4u is specialized in staffing the market niche for (heavy) lifting, hoisting, rigging and specialised transport with competent and experienced personnel. Our 12hoist4u professionals are well trained, certified and motivated to securely and efficiently support our clients for short or longer periods of time. 12hoist4u's ambition is to bring professionals and clients together all over the world. At founding the brand name 12hoist4u it was our aim to become leaders in the niche market to which we are fully dedicated: lifting, hoisting, rigging and specialised transport

LR 1800-1.0, LR 1600/2 and LR 1600/2-W The three-man formation consisting of an LR 1600/2 and an LR 1600/2-W from Gruas Aguilar, together with an LR 1800-1.0 from Eurogruas 2000. They were on-site permanently from June to December 2020 carrying out a wide variety of 2/5 hoisting work. The gigantic heavy girders for the roof structure, in particular, had to be hoisted into position.