2024 XCMG QY130KH

• New Crane
• One Year Warranty
• Immediate Delivery

SUPERSTRUCTURE

-Frame: Designed  and manufactured  by XCMG,  made  of high strength steel.

-Hydraulic System: Electric proportional variable pump is used for lifting, elevating and telescoping operations. A closed pump is used to drive slewing operation. The proportional solenoid directional control valve; air- cooled hydraulic oil radiator.

Effective volume of hydraulic oil tank: 592 L

-Control System: The electric proportional control system is equipped with two levers at left and right sides controlling the main movements of the crane, and stepless slewing speed regulation is available.

-Main Winch System: Hydraulic control is used for speed regulation. The system is driven by a hydraulic motor through a planetary gear reducer, with a normally closed brake, a balanced valve and a grooved drum equipped.

-Auxiliary Winch System: Hydraulic control is used for speed regulation. The system is driven by a hydraulic motor through a planetary gear reducer, with a normally closed brake, a balanced valve and a grooved drum equipped.

-Slewing System: A single-row, four-point contact-ball external slewing bearing; the system is driven by a hydraulic motor through a planetary gear reducer with constant-closed brake equipped, and may continuously slew 360 °  . Power control and free slewing function as well as stepless speed regulation are available.

-Luffing System: Single luffing cylinder and the luffing counterbalance valve with the load compensation function. Balance valve-controlled boom gravity combined with power for lowering boom is used for boom luffing down.

-Operator’s Cab: Steel cab with a full-view windshield, safety glass, sliding door, adjustable seat with electric heating function; it can tilt backward about 20 °  ; double-layer sun shield is adopted for roof window; sun shield is also equipped at the windshield and rear window; wipers, roof guardrails, pull-out step, LMI, human- machine interactive control panel, electric controlled armrest, engine accelerator pedal, engine start switch, etc. are also available. Heater, air conditioner and fire extinguisher of 2 kg are standard.

-Safety Devices: Hydraulic counterbalance valve; hydraulic relief valve; hydraulic double-way valve; LMI; lowering limiter; anti-two block; anemometer; winch monitoring device.

-Combined Counterweight: Total weight is 45 t.

-Hook Block: 75 t 8 t

-Boom: 7-section boom with U cross-section, welding structure, with single-plate  boom head and compact  boom tail. Single-cylinder pinning telescoping  system, Boom length: 13.8m~75m.

-Jib: The jib consists of a connecting bracket, a rotating bracket and two lattice sections. Three offset angles of 0 °  , 15 °  and 30 °  are available. It is stowed along the side of the boom.

Jib length: 11 m,18.5 m

-Single Top: Installed at the boom top, used for single line operation. Its lifting performance  is the same as that for boom, but the max. lifting load could not exceed 8 t.

-Boom Extension: Two-section lattice jib, welded structure, attached to boom head.

Length of boom extension: 8 m

-Independient Jib Head: Lattice welded structure, attached to boom head.

Length of independent jib head is 2.9 m

CHASSIS

-Frame: Designed and manufactured by XCMG, it is made of high strength steel with fully covered walking surface and anti-torsion box-typed structure.

-Outrigger:   Four outriggers; front two-stage outrigger beams are swung, and rear outrigger beams are extended. Outrigger beams and jacks are hydraulically controlled. There is an outrigger control station located at each side of the chassis, and there is a level gauge, an illuminator and speed buttons on each control station. There is a check valve fitted in each outrigger cylinder, and a double-way hydraulic valve fitted in each jack cylinder.

Float dimension: 473 mm ^ 608 mm

Reaction force of outrigger at max. lifting load: 872 kN

-Engine: WP10.5H460E50, in-line, 6-cylinder, water cooled, electric control diesel engine, made by WEICHAI, with rated power of 338 kW/1900 rpm and max. torque of 2100 Nm/1000-1400 rpm, compliant with China V emission standard. Max. reference torque : 2289 N.m ( China V ) Fuel tank volume : 500 L 

AdBlue tank  volume : 35 L

-Transmission: Mechanical automatic transmission, 12 forward speeds and 1 reverse speeds.

-Alxes: High strength axles, axles 1,2,5 are for steering, axles 3,4,5 are for driving.

-Suspension: Leaf springs are adopted for front suspensions; double trailing arm type suspensions  are adopted for rear suspensions.

-Tires: 14 tires and I spare tire, axle 1,2,5 are equipped with single tire, axle 3,4 are equipped with double-tire, manufactured by manufactured by Double Coin/Techking.

Tire specifications:325/95R24 or12.00R24

-Brakes: Service brake: double-circuit air pressure brake acting on all wheels.

Parking brake: spring-loaded brake, acting on wheels of axles 2,3,4,5.

Auxiliary brake: engine exhaust brake, engine retarder brake

-Steering: Axles 1 and 2 are mechanically steered + hydraulic power assistance; axle 5 is steered through cylinder control. Various steering modes can accommodate to different working conditions..

-Drive’s Tab: New enclosed cab, luxury and comfort. It is designed to be leak-proof, anti-corrosive and shock-proof. It is equipped with a windshield offering outstanding visibility, electrical adjustable rear mirrors, electric control washer, electronic lifters of doors and windows, air heater with defrosting function, heater & air conditioner, radio player and new material mat, etc. A mechanical shock absorber seat is supplied for driver and a simple sleeper for co- driver. A fire extinguisher of 3 kg is available. Heater and air conditioner are standard.

-Electrical System: 24V DC, two sets of 12 V battery in series. Generator: 28 V-80 A.